Gadgets

Cleaning Roomba’s Brushes and Filters

Pinterest LinkedIn Tumblr

Cleaning Roomba’s brushes and filters is necessary for keeping Roomba running at its best. After doing some research on the web it seems that cleaning Roomba’s brushes and filters is pretty important to keep it working properly.

Roombas are great little robots, but they do have their downsides. Because of their compact size they can’t hold much dirt in their small dust bins. They also have brushes, filters and a spinning side sweeper that can get clogged with hair and dirt over time. We’ve been working on a few tricks to keep your Roomba running as good as new.

Replace the brush if it is too worn or has a lot of hair wrapped around it

To clean Roomba’s brushes you’ll need to remove them from the main body of Roomba. To do this, twist off the side brush cover with your fingers. Underneath is the side brush and another filter; remove both by pulling them out of their housings – make sure you hold onto the wires so they don’t get pulled out as well.

Next, use a small Phillips head screwdriver to remove the screws that hold the brush in place. You can then pull the brush out and give it a good cleaning. Be careful not to lose the tiny screws! If your brush is too worn or has a lot of hair wrapped around it, you might want to replace it.

How to Make Roomba Quieter

When you turn on your Roomba it can be quite loud. The noise is part of the way it cleans, but if its too much for you there are ways to make it quieter.

Some tips on ways to make Roomba quieter:

  • Turn down ‘Max Power’ in the settings menu
  • Keep Roomba away from walls and furniture as it can amplify the sound
  • Use a rug underneath Roomba to help muffle the noise
  • If possible, run Roomba during the day when it’s less likely to wake people up
  • Place a towel over Roomba while it’s cleaning to help absorb some of the noise

Replace Roomba’s filters and dust bin

Once you’re done cleaning the brushes, clean the rest of Roomba. Use a small brush to gently sweep off any hair or dirt from the top and sides of Roomba before lifting up its cover. You’ll find two filters inside; carefully remove them and give them a good cleaning with a damp cloth.

Next, remove Roomba’s dirt bin and empty it before using the small brush to clean it as well. Once your filters and dustbin are all clean, you can put them back into Roomba and replace its cover.

Replace Roomba’s brushes if they’re worn or have a lot of hair wrapped around them

If you’ve been using your Roomba for a while, its brushes might be worn down or have a lot of hair wrapped around them. This will affect how well it cleans your floors, so it’s important to replace them if they’re in bad condition. You can buy new brushes directly from iRobot, or you can order them from other retailers.

Keep Roomba’s brushes and filters clean

Cleaning Roomba’s brushes and filters is pretty important to keep it working properly. If they get clogged with dirt, lint and pet hair they can’t do their job as well. This means less of your house gets cleaned, and Roomba may not be able to make it back to its dock when it needs a charge or needs to be manually carried home by you.

Conclusion

With a few simple tools and products, you can keep Roomba’s brushes and filters clean to ensure that it keeps your floors as clean as possible. If you’ve been having problems with clogged brushes or soggy filters there is likely an underlying cause like a build up of dust and dirt in your house. You can try using a wet-dry vacuum to clean up the dirt before it has a chance to clog Roomba’s brushes, or you could try using a robot vacuum cleaner to do the job for you. Whichever method you choose, make sure you keep on top of the cleaning and replace any worn parts as soon as they’re needed. By doing this, you’ll keep Roomba running like new for a long time!

Author

Write A Comment

2 × three =